To order your part, find it in the diagram then locate the appropriate part number and double click on it.
1 |
070387 |
|
Basket WF |
2 |
070429 |
|
Bolt hex HD 2-56 x .875 S/S, 4 req. |
3 |
070430 |
|
Bolt, 3/8 -16 x 1-1/4 hex cap 18-8 SS, 4 req. |
4 |
070431 |
|
Bolt, 3/8 -16 x 2 hex cap 18-8 SS, 2 req. |
5 |
070927 |
|
Foot WF, pump motor support almond |
6 |
070929 |
|
Foot insert WF pump almond |
7 |
071131 |
|
Plug drain WFE, almond, 2 req. |
8 |
071403 |
|
Nut, 3/8, 16 brass nickel plated, 2 req. |
9 |
071406 |
|
Nut, 1/4, 20 hex. hd. SS, 2 req. |
10 |
071444 |
|
O-ring #238 3.484 x .139, buna N 70 |
11 |
071652 |
|
Screw, 1/4, 20x1 LH phillips pan MS 18-8 S/S 1 req. |
12 |
071657 |
|
Screw, 1/4, 20 x 1 in.hex cap 18-8 SS, 2 req. |
13 |
071660 |
|
Screw set, 4-40 x 1-1/8 WFE sckt cap 18-8 SS, 2 req. |
14 |
072183 |
|
Washer, flat 1/4 x 5/8 20 GA thick 18-8 SS, 2 req. |
15 |
072184 |
|
Washer, flat 3/8" ID x 7/8" OD .05 Thk 18-8 s/s - (qty. 51 & qty. 9) 3/8 ID x 7/8 OD .05 thick 18-8 S/S, 6 req. |
16 |
072928 |
|
Diffuser assembly, WFE-12, 3 HP only black |
17 |
073131 |
|
Impeller WFE 12 1000 assembly |
18 |
175713 |
|
Impeller, washer gasket |
19 |
192115 |
|
O-ring, drain plug 112, .487 x .103 buna - N 70, 2 req. |
20 |
350013 |
|
O-ring pot flange CH/WF 2-436, 1 req. |
21 |
350015 |
|
Housing WFE almond |
22 |
350201 |
|
Seal Plate Kit WFE Almond (contains seal set, PA7/WFE SER) |
23 |
357102 |
|
Almond gasket for seal plate |
23 |
357100 |
|
Black Gasket for Seal plate 1 |
24 |
357151 |
|
Lid, see thru WF |
24 |
357156 |
|
Lid, Chemical Resistant |
25 |
357199 |
|
Clamp cam & ramp WF almond |
26 |
357243 |
|
Pot WF assy. (contains 1, 7 (qty. 2), 19 (qty. 2), 20, 21, 24, 25) |
27 |
350601 |
|
Control cover assy. kit almond (contains cover assy., hardware/gasket kit, instr.) |
28 |
350921 |
|
Drive VS-3050 assy. kit (contains drive VS-3050, control cover assy.) |
28 |
351021 |
|
Drive VS-3050 assembly kit, almond (contains Drive VS and Control Cover Assembly) |
29 |
352401 |
|
Motor fan kit almond (contains fan shroud, hardware) |
30 |
350105S |
|
Motor VFD 3.2KW PMSM replacement almond |
31 |
350612 |
|
Hardware/gasket assy. kit (contains 3 screws, 3 spacer caps and drive gasket) |
32 |
070114 |
|
Power end IntelliFlo (contains items: 2, 4, 10, 11, 13, 15, 16, 17, 19, 22, 23, 28, 30) |
32 |
070117 |
|
Power end IntelliFlo VS + SVRS (contains items 2, 4, 10, 11, 13, 15, 16, 17, 18, 19, 22, 23, 28, 30) |
|
350122 |
|
50 ft. Communication Cable |
1: Used on pumps manufactured after 2/1/08. 2: Used on pumps manufactured before 2/1/08. *: Not serviceable parts. 3: Contact factory for IntelliFlo VS SVRS
|